DIY Modern Elizabethan Ruffle



A ruff one of the more accentric garments of the Elizabethan Era, worn in Western Europe from the mid-sixteenth century to the mid-seventeenth century.
I have always found a ruff as a luxury detail in outfit. So I wanted to try to make one for my project. Just because I choose to use a leather, I thought my ruff should be big enough (length 35cm) to show all the beauty of the fabric. I have been considering to use real or faux leather, but faux leather seems to be easier to sew and it is lighter.


1. Measure your desired width. I measured 35 cm, as I wanted to have pretty wide ruff.


2. How much fabric do you need ?
 I used formula : Width of the neck x Lenght of fabric used for 1cm pleats 
(Check how many pleats can fit in 1cm and then measure used leather for it. I fit 3 pleats in 1cm which were equal to 31 cm of material.)


My neck measurement - 33cm. The leather length used for 1cm - 31cm. 33x31=1023cm. 
So my fabric Length - 10,23 metres/ Width - 35cm. 

   

3. I pleat leather at 5.2cm intervals. Then sewed every 3 pleats with thread to join them together. The faux leather was really soft so it was easy to sew it.


4. I used a paper piece which was the length of my neck (33cm) to measure how many more pleats do I have to do.


5. As a neck band I used black ribbon which I attached to the ruff (throughout the entire lenght of the ruff) and left an extra 30cm at the ends, which will help tie on the ruff and secure it.

I was also thinking to attach some lace at the edge, but did not find an easy way to do it. Because to sew 10 metres of lace turned out to be terrifying. Woops. Maybe next time.


Project





Comments

Popular posts from this blog

I am an Immigrant